How to Replace a Nissan Juke Spare Key
Nissan Juke is a fun and stylish hatchback that features an unusual engine setup. It's a bit noisy, but it's enjoyable to drive.
The key fob battery on the Nissan Juke has to be replaced every two years or so, or if it's low. You can do it yourself, but you will need some tools.
Dead Coin Battery
If your Nissan Juke key fob has stopped working, the first thing to examine is the battery inside it. It may be dead and need to be replaced. This is a simple fix that takes only several minutes. Flip the fob upside down and you'll be able access the tiny latch/release on the back. Remove the old battery and then insert a new one, making sure that it's facing down in the fob and line up the two halves of the fob with care.
If the fob has been exposed to water, it will need to be cleaned prior to putting the new battery in. This can be accomplished by using paper towel and isopropyl alcohol or electronic cleaner, and let it dry completely before re-inserting battery.
To start the car, the key fob must also be connected to the car. This can be accomplished by following the instructions in the owner's manual or by using an OBDII scan. If the key fob is not been linked, it is most likely the reason of why it has stopped working. It could also be that the fob is equipped with a faulty chip, but this is extremely rare. In this case the need for a new receiver module may be required. If this is the situation, it's best to be replaced by a certified technician.
Water Damage
Key fobs are battery operated, and these batteries must be replaced every two years or as often, or at the first sign of your car not responding when you hit the "start" button. The keys' rubber seals are designed to keep out water, however submerging a key fob in ocean or pool water can damage the chip's electronic. If this is the case, you will need to buy a replacement key from Nissan or an automotive locksmith.
If the key fob has a working chip, it's likely that the computer has simply lost its connection to it, which could happen for any number of reasons. This can be resolved by restarting the car. If the "Key ID error" message persists then you should contact Nissan for assistance.
Three common causes are dead battery on the key fob and a key that's not programmed, and a damaged key fob. The first two are fairly easy to fix, and the third is difficult to pinpoint and repair on the spot, however it is generally fixable by a little patience. WhoCanFixMyCar lets you compare Nissan Key Replacement costs in your area and then book your repair. keyless ignition can read reviews of local Nissan dealerships, Nissan mechanics, and garages in a matter of moments.
Faulty Chip
The key fob of your Nissan Juke contains a special chip which sends a message to the vehicle whenever you turn it. The key might be inoperable when the chip is defective. If this happens it is only possible to repair the issue by replacing the key. There are many reasons your Nissan Juke's key may be damaged, including water damage or a dead battery for your coin or a malfunctioning receiver module.
If your key fob stops working after a soak in the wash or bath, it is important to examine the chip for water damage. Make sure the metal retainers are in good shape and that the chip is not exposed to water. If you notice any signs of water damage, try taking off the battery and cleaning the electronic component using isopropyl ethanol or electronic cleaner.
If the chip is not working, you will need to visit your local locksmith shop or dealership. They will need to know the year the make, model, and year of your vehicle to find the replacement. You will also need to write down the VIN (Vehicle Identification Number) to ensure that the locksmith or dealer knows exactly which key you have. This will enable them to check the correct key code, and ensure they are cutting the correct key.
Faulty Receiver Module
The key fob transmits radio frequency signals to your car in order to perform various functions. The key fob is able to unlock your trunk while you hurry with groceries to the car or start your vehicle by pressing a button on the fob. It can also open your windows and turn on the horn if have a mishap and lock your keys inside the car.
If the key fob isn't able to function, it could be due to a problem in the receiver module. The receiver modules are tuned so that they can receive specific frequencies which correspond to the signals sent by Nissan key fobs. A damaged receiver module can prevent your car from responding to the signal received by the key fob from Nissan.
Regardless of how your Nissan key fob gets damaged, it's important to have a spare in event that the key is damaged or lost. A spare key can be programmed by a locksmith or a dealership to work with your Nissan and will help you avoid the difficulty of locking your keys in your vehicle or losing them.
If your Nissan Juke's key fob has been exposed to rain or clean tap water, you can fix the issue by cleaning it using isopropyl, or an electronic cleaner. If the chip is damaged you'll have to purchase an alternative keyfob that could be programmed for your vehicle by a dealer or locksmith.